Choosing Manual J Design Service for Hydronic Heating System

 

Are you considering new construction? Or just retrofitting your existing construction? You should consider manual J design service to put together complete integrated hydronic heating package – from air to water heat pump to PEX piping and manifolds and everything in between.

Considering Heat Load Design Service

Proper designing of any HVAC project requires understanding the heating or cooling load. The heating load is the number of BTUs needed during the coldest time of the year in your area. It should keep the house at its design set point temperature.

The heating load depends on different factors. An improperly sized system can result in a cold house that can’t keep calm in cold weather. Oversizing the heating equipment will result in additional upfront costs and higher monthly operational cost. Getting the right size is paramount.

Designing Radiant Floor Heating System–

When hiring Manual J design service, they use state-of-the-art CAD design software to optimize loop layout design. Hence, your contractor or any DIY will make sure that there are not cold areas. Whether you need hydronic heating in concrete, under floor joist or sub floor, you should get in touch with Arctic Heat Pumps as soon as possible.

Using duct work, you can incorporate hydronic fan coils for heating individual room zone or hydronic air handler to deliver centralized heating and cooling. When it comes to sizing of the system properly, it starts with understanding the heat demand of your building. They specialize in providing hydronic heat design service to make sure that your project is successful.

Sizing the Hydronic Pump –

Generally, big size pumps cost you money and even more to operate. Sizing a heat pump properly is important. This process requires proper calculations. More often, it’s quite challenging task especially if a DIY project involves building with hydronic heating zone.

They use simulation software to calculate the right size pump for your project. Remember that, if a hydronic heating system is properly sized, it will make sure that you have proper performance and less operational costs.

Control Logic –

Are you designing an advanced heating system with different zones? If so, proper system control is quite challenging. However, getting all parts communicating together produces seamlessly integrated system.

While designing a hydronic heating system, they’ll build the control logic ensuring quick setup by the customer or contractor to maximize the performance first time.

The hydronic heating system uses RESOL MX controller so that they can add the control logic to the SD card or email the end user the layout. All you need to do is to plug the SD card into the MX controller and you can upload the control logic quickly to the controller without any programming.

Remote Monitoring –

Nowadays customers prefer to have complete control over their system anywhere at any point of time. Upon designing a hydronic system along with the RESOL MX controller, you will get free access to the vbus.net platform. This allows you to see the status and parameters of hydronic project in real time over any type of device you use including computer, phone and tablet.

Bottom Line –

At Arctic Heat Pumps, we provide you with every aspect of your hydronic heating kit from the mechanical design to the electric wiring table for connection of pumps, sensors and valves. If you need complete hydronic design service without additional engineering costs, feel free to contact us today at +1 866-800-8123.